MCE Axpert VM2 2.5kVa and Hubble S-100A LiFePO4 Battery Kit

MCE Axpert VM2 2.5kVa and Hubble S-100A LiFePO4 Battery KiT

INVERTER

Technical Specifications:

• Axpert VM II 2500W-24V
• 2500W 24V Pure Sine Eave Inverter with 3000W MPPT Solar controller

Features and Functions

• Pure sine wave solar inverter
• Output power factor 1
• High PV input voltage range
• Battery independent design means the Axpert VM II 2.5kW can keep the power system operating with or without battery connected. When solar and AC power are not available, batteries can support the system by storing energy produced earlier. When batteries are absent, the inverter can still be running with energy from utility (or generator) or solar to loads alternatively.Batteries are still required.
• Built-in 100A MPPT solar charger
• Battery equalization function to optimize battery performance and extend lifecycle.
• Built-in anti-dust kit for harsh environment
• Warranty: 12 months

Input

• Voltage: 230 VAC.
• Selectable Voltage Range: 170-280 VAC (For Personal Computers); 90-280 VAC (For Home Appliances).
• Frequency Range: 50 Hz/60 Hz (Auto sensing).

Output

• AC Voltage Regulation: 230 Vac ± 5%.
• Surge Power: 5000VA
• Efficiency (Peak): 93 %
• Transfer Time: 10 ms (For Personal Computers); 20 ms (For Home Appliances).
• Waveform: Pure sine wave.

Battery

• Battery Voltage: 24 Vdc.
• Floating Charge Voltage: 27 Vdc.
• Overcharge Protection: 32 Vdc.

Solar Charger & AC Charger

• Solar Charger Type: MPPT.
• Maximum PV Array Open Circuit Voltage: 450 Vdc.
• Maximum PV Array Power: 3000 W.
• MPP Range @ Operating Voltage: 60 ~ 400 Vdc.
• Maximum Solar Charge Current: 80 A.
• Maximum AC Charge Current: 80 A.
• Maximum Charge Current: 80 A.

Physical

• Dimension, D x W x H (mm): 90 x 288 x 357
• Net Weight (kgs): 6.5
• Communication Interface: RS232

Environment

• Humidity: 5% to 95% Relative Humidity (non-condensing)
• Operating temperature: -10°C to 50°C
• Storage temperature: -15°C to 60°C

BATTERY:

Specification: 12.8V 1.2KWH
Rating: 1C

Maximum continuous discharge: 100A

Cells: 1st life prismatic LiFePO4

Series: 1, 2, 3 or 4 batteries

Parallel: Up to 16 batteries in 48V configuration

Communication: None​

CAN Bus: No

Hubble Cloudlink Ready: N

Hubble S-100A 1.2kWh 12V 100Ah LiFePO4 (First Life Cells)

• Low self discharge

• High cycle and service life

• 1C High performance lithium battery

• Internal Battery Management System

• Excellent high temperature performance

• High energy density and conversion efficiency

• Can be configured in 12V, 24V, 36V or 48V in series (Battery Balancer required for 24V, 36V or 48V configuration)

• BMS protects internal cells and ensures smooth operation

• Built in protection for over-charge, over-discharge & over-temperature