The indirect system is used in locations where frost occurs, where the ambient temperature falls below 5°C, and where the water quality is poor (more than 600ppm Total Dissolved Solids / Minerals). The system can be used with one or two Solar Collector Panels dependent on the capacity of the solar tank.
R27,214,00
The 300L Kwikot solar geyser with flat plate collector is an Indirect System complies with SANS 1307, is SABS 400kPa approved and can be used as a close-coupled system or split system. The inner cylinder is manufactured from 2mm steel and thermo fused porcelain enamelled for cylinder longevity and hygiene.
Polyurethane insulation between the heat exchanger and outer casement reduces energy and heat loss. 2 x aluminium sacrificial anodes are fitted for corrosion protection. The 300L Kwikot solar geyser with flat plate collector is designed for domestic hot water application in conjunction with one or more solar collector panels or solar vacuum tubes. The Solar Water Heater is fitted with an Isolator Switch (IPX4 rated).
The two extra fluid connections required for connecting solar collector panels or solar vacuum tubes, and the booster element ensures that the solar water heater can be used as a conventional electric water heater and as a solar water heater.
The 300L Kwikot solar geyser with flat plate collector has a thermostat that will automatically switch on when the incoming hot propylene glycol fluid from the solar collector panels has not reached the set temperature setting on the thermostat. This will occur on cloudy days and at night when the water temperature drops in the solar water heater or when hot water is drawn off and cold water enters the solar water heater.
Reg No. 2011/0018224/07
VAT No. 4350296465
Address: 2 Crane Lane, Lanseria, 1739, South Africa
Phone:+27 71 810 4516
Email:[email protected]
Reviews
There are no reviews yet.